TWO RAM AUTO-TIE BALERS

1 - USED SELCO 2R12100 2 RAM BALER

Manufactured in 1991.  Hopper feed opening of 72" x 54", bale size 45" x 30" x 62" with a 12" main cylinder, 9" ejector cylinder, 100 hp motor, 460 vac 3 phase.  Left hand eject.  2006 Accent Wire Tier.  Inventory #4038.

1 - USED GLOBAL MODEL SR-5 TWIN RAM BALER

60" x 44" feed opening, bale size 50" x 31" x 44" expanded, main cylinder 9" bore full penetration, 159,043 platen force, eject cylinder 8" bore, non-ferrous liners, bale retention cylinders (4) 3" bore, Cranston 97 Automatic Wire Tier, serrated shear knife, 60 HP 460V.  Inventory #4042.

1 - USED KILCOM 2-RAM BALER WITH LATE MODEL STEEL BELT SORTING INFEED SYSTEM

Bale size 44" x 46" x 30", 60 hp motor, 460 volts, 9" main cylinder, 8" ejector cylinder with US Wire Tier Model 341, used 60" wide 6" pitch steel belt conveyor.  "S" shaped steel belt conveyor with lower horizontal sorting and loading area of 28', an incline at 35 degrees, upper horizontal sorting and loading area of 28', an incline at 35 degrees, upper horizontal section of 3' with a 5 degree nose over and a discharge height of 10'2" center of shaft.  Inventory #4040.

1 - USED HARRIS HRB-8NF TWO RAM PRESS

Feed opening 74 x 132, bale size 64" x 45" x 31", main cylinder 12" bore 198 tons of force, ejector cylinder 8" bore 88 tons of force, 100 H.P. 460 volt, capable of processing 11 TPH of UBC's, non-ferrous grooved floor liners, Allen Bradley Controller, US 331 Automatic Wire Tier.  Inventory #4035.

1 - USED HRB-10 TWO RAM BALER

Hopper opening 9'x6', feed opening 8'x5', bale size 64"x44"x31" expanded, main cylinder 12" bore, ejector cylinder 12" bore, two (2) 100 hp motors, serrated knife blade, nonferrous floors, with late model US 332 Wire Tier makes heavy bales.  Equipment was rebuilt in 2000 and relined in early 2007.  Inventory #431.

1 - USED IPS MODEL TR 1388-200 BALER WITH PRE-COMPRESSION LID

Right hand discharge, hopper opening 96" x 72" wide, bale size 45" x 30" x 63", motor size (2) 100 h.p., bale release, bale separation door, U.S. Wire Tier 341, phone modem, conveyor controls.  Inventory #4025.

1 - USED/RECONDITIONED HRB 2-M WITH HOPPER

Feed Opening of 60"x96", bale size 64"x44"x31", 50 hp, 230/460 volts, main cylinder 10" bore, eject cylinder 8" bore, US Wire Tier System, oil heater, oil cooler, left hand discharge.  Inventory #4020.

OPEN END HORIZONTAL BALERS

1 - USED BALEMASTER OPEN-END AUTO-TIE BALER MODEL E-430

30" x 30" feed opening, 30" x 36" x variable length bale, 8" cylinder, 25 hp motor.  Inventory #3028.

1 - USED C&M WIDE MOUTH AUTO TIE MODEL 5042 BALER

Feed opening 50"L x 42" W, bale size 40" tall x 42" wide x variable.  75 hp motor, 9" main bore cylinder, dual density bands with 5" bore, Allen Bradley controls, five wire tie, 100# wire spool system.  Inventory #3020.

2 - USED BALE MASTER MODEL E-980 AUTO-TIE WEYERHOUSER SPECIAL PLASTICS/ALUMINUM BALERS

With 42"x30" feed opening, bale size of 30"x42"x variable, 5 wire tie, main cylinder size 10' bore, dual density bands, 75 h.p. 480 volt.   This baling systems was specifically designed to process plastics and aluminum cans, but it also makes a highly dense bale of high grades and news print.  Inventory #3010 & 3011.

Pictures

available

upon

request

1 - USED BALEMASTER 4230 E MANUAL TIE BALER

Feed opening 42" x 34", bale size 36" x 42" variable, main cylinder 8" dual density bands, 30 h.p. motor.  Great baler for smaller cardboard and high grade paper.  Inventory #3006.

CLOSED DOOR HORIZONTAL BALERS

1 - USED IPS MODEL CD-865HD CLOSED DOOR HINGE SIDE BALER & CONVEYOR

Bale size 30" x 43" x variable length.  Main cylinder 8" bore, 130" stroke, 5.5" rod, 30 hp motor, 460 volt, 3 phase.  Inventory #2039.

1 - USED CLOSED DOOR BALER MODEL NA1440

30" x 50" opening, bale size 30" x 36" x 45", 25 hp motor, 10" hydraulic ram, door cylinder 5" bore with door  cushion restraint system, oil cooler, 480V 3-phase 60 cycle.  Inventory #2038.

1 - USED SELCO HS-12 W/BLO-APCO

Model 3 JK-42 rip shear Shredder Gaylord/ Cart Tipper, 42" wide Infeed conveyor with weight sensor stop, 42" wide infeed on 3 shaft Piggy Back Shredder, Baler infeed of 30" x 30", main cylinder 7" bore, motor size 30 HP. System designed as Dump and Run processing coated stock, card board and other fibers.  Inventory #2013.

1 - USED SELCO HIGH PRESSURE CLOSED DOOR BALER MODEL 48ALP36

RECONDITIONING IN PROCESS.  Feed opening 36"x30", bale size 36"x30"x60", main cylinder 10" bore, door cylinder 5" bore, motor size 30 hp 480v, oil cooler.  Inventory #2028.

1 - USED SELCO HIGH PRESSURE CLOSED DOOR BALER MODEL 60ALP36

RECONDITIONING IN PROCESS.  Feed opening 36"x30", bale size 36"x30"x60", main cylinder 10" bore, door cylinder 5" bore, motor size 30 hp 480v, oil cooler.  Inventory #2029.

1 - USED ECONOMY WIDE MOUTH CLOSED DOOR BALING SYSTEM MODEL 72-004-42-40

Feed opening 42" x 50", bale size 40" x 42" x 72" long, cylinder 8" bore, 20 hp motor (upgraded Maren PowerPack).  Inventory #2027.

1 - USED SELCO/HARRIS POLYSTYRENE HORIZONTAL MODEL HL-50PS BALER

50 hp, 230/460 volt.  Bale size 29"x30"x48" long.  Poly breaker attachment 40"x50" throat.  10" diameter ram.  Operator control station pedestal.  Fan cooled hydraulics.  Automated baling cycle.  Automatic baler eject.  Full bale alert horn.  Inventory #2026.

1 - USED KMF MODEL 3036 CLOSED DOOR BALER

Feed Opening of 30"x36", bale size 30"x36"x60-72", motor size 10 h.p. 460V, ram pressure 39,250.  Inventory #2016.

1 - USED MAREN ROLL AROUND RAG BALER

Feed opening 30" x 40", bale size 30" x 20" x 36" shoulder bale, no shear manual lid, main cylinder 4" bore, 10 h.p. motor size.  Inventory #204.

1 - USED ECONOMY LAKE CLOSED DOOR BALER

Feed opening 30" x 50", bale size 42" x 30" x 30", 5" main cylinder, 2 single door cylinder, 10 h.p. motor.  Inventory #207.

VERTICAL BALERS

1 - USED PIQUA DOWNSTROKE BALER

36" wide x 24" deep x 30" (variable) height, 5 HP, 3 phase motor, 4" cylinder bore.  Please reference Inventory #V0032.

1 - NEW DOWNSTROKE MODEL SS10 BALER

60" x 30" x 30-34" bales, 10 hp, 3 phase motor, 6" hydraulic cylinder, automatic cycle.  Please reference Inventory #V0028.

1 - NEW DOWNSTROKE MODEL SS10 BALER

60" x 30" x 30-34" bales, 10 hp, 3 phase motor, 6" hydraulic cylinder, automatic cycle.  Please reference Inventory #V0029.